GRAIN DRYER SERVICE CONTRACT
AG DRYER SERVICES will perform the following preseason work on your dryer. The work will be done at a time agreed upon between AG DRYER SERVICES and the customer. Any work performed other than the checklist will be charged at the current AG DRYER SERVICES hourly rate.
No parts are included with the Service Contract.
Customers with numerous dryers in the same area can be quoted special prices upon request.
CHECK LIST
 | Inspect sparktrode/sparkplug/ignitor. Adjust as needed. |
| Inspect flame switch/scanner/flamerod. Clean and adjust as needed. |
| Inspect and clean burner. Redrill as needed. |
| Inspect air inspirators, Clean and adjust as needed. |
| Inspect and clean electrical cabinet. |
| Inspect and check tightness of all panel connections. |
| Inspect and clean panel components, including relays and starters. |
| Inspect and clean air switch and air switch tube. |
| Inspect indicator lamps, lens covers, and fuses. |
| Inspect belts and belt tension. |
| Lubricate bearings on fans and fan motors with greaseable type. |
| Check and record fan motor amps. |
| Check oil level in gear boxes, check for water at drain plug. |
| Inspect belt and hand crank assembly on metering drive. |
| Inspect grain columns for blockages, cracks, rusted areas and plugged openings. |
| Inspect metering system including housing, bearings, flutes, and clean out. |
| Inspect chains and sprockets and adjust to proper tension. |
| Inspect chains and/or belt guards as to proper placement. |
| Inspect screw conveyor housings and flighting where possible. |
| Inspect and clean bindicator. |
| Check control circuits for possible jumpered safety switches. |
| Inspect vaporizer and regulator on LP systems. (Servicing will be an additional charge). |
| Test fire the dryer if possible. |